XchaiX

Hai kawan2.. nak link skydrive folder pada pc anda? ikuti langkah dibawah. saya dah buat, sukses. dapat 25GB di cloud network (fail di langit.. macam kerajaan langit ler pulak.. hahahahahaha coba la..) 1.Open your browser, and navigate to http://skydrive.live.com/. 2.Sign in with your Windows Live ID. 3.Copy the UID part of the displayed URL, like: https://cid-1234567890abcdef.skydrive.live.com/ . 4.Leave SkyDrive open, and take note of one of your folder names. 5.Open Windows Explorer. 6.On the left sidebar, right-click on Network. Choose Map network drive. 7.Enter the following URL: \\docs.live.net@SSL\1234567890abcdef\XYZ 8.Replace “XYZ” with the folder name you noted and that you want to map. Note: Replace “Documents” with “^2Documents”, and “Public” with “^2Public”. 9.Choose a drive letter, and submit the dialog. 10.You will be prompted for your Windows Live ID. Sign in. 11.Then, you can access all the files and subfolders within your SkyDrive folder, including copying and pasti...

P1′s DV 230 WiMAX Modem is one of the first WiMAX with WiFi modem that’s easy to use thanks to its simple plug and play approach. The only technical bit for the user is to enter the predefined WEP password which is uniquely customised for each USB WiFi Module. It looks all good and dandy but there’s just one small problem. We found out that the “unique” WEP password isn’t that unique after all. If you’ve seen or used one of these, you will notice that they will give a randomised Wireless Access Point name or SSID such as 07D24A and followed by a long WEP password such as 7D24A1FFB0. Sure, you think that this is all safe but recently it was brought to our attention that there’s a simple flaw with the way they created these unique WEP passwords. How to access your neighbour’s default unconfigured P1 DV 230 Modem? After reading up some postings online and comparison with our own, we’ve discovered a similar pattern in all P1 DV 230 modems. Here’s how you get the WEP Password from the SSID:...

penat aku cari apa sebab wifi aku yang dah granted jadi AP masih tak boleh connect dengan firewall IPCOP. hari ni aku dah jumpa.. alhamdulilah. hangpa nak tau? check le info dibawah.. I've done the following: * Blue must be on a separate physical wire from Green (not on same hub/switch) * Blue must be on a separate logical subnet. * When using an access point, you must add each computer individually to Blue Access. * When using a wireless router and connecting via the WAN port, you must add the MAC address of the wireless router to Blue Access (see 3.2.2). And it works just fine Source: http://www.ipcops.com/phpbb3/viewtopic.php?f=20&t=11916 & http://www.ipcops.com/wiki/howto:wireless